Photographing reflective surfaces can be a nightmare, or not, depending on how you set up your lights. David Bergman demonstrates how to light glass:
Avoid firing a flash straight at the wine glass.
Direct Flash
Direct flash results in reflections from the flash in the glass.
The solution is to place the light behind the glass.
Place your light behind the glass.
A big softbox works well for lighting glass from behind. But you can also bounce your flash off of a white reflector or white piece of paper.
Backlighting
With a completely white background, it’s hard to define the edges of the glass. You can use negative fill to darken the edges.
Use black foam core to define glass edges.
To accentuate the edges of the glass, use black foam core or anything dark to surround your subject.
Without negative fill
Negative fill helps to define glass edges.
To reverse the look, place the black foam core in front of the white background so that the light slips out from the sides.
This creates a beautiful rim lighting effect.
What do you think of this tutorial? Share with us your thoughts in the comments below.
Go to full article: Quick Tips for Photographing Glass
What are your thoughts on this article? Join the discussion on Facebook
PictureCorrect subscribers can also learn more today with our #1 bestseller: The Photography Tutorial eBook
The post Quick Tips for Photographing Glass appeared first on PictureCorrect.
from PictureCorrect http://bit.ly/2ILcM4l
via IFTTT
0 kommenttia:
Lähetä kommentti