maanantai 6. helmikuuta 2017

PictureCorrect.com: How to Keep Your Camera Stable for Sharp Photos at Slow Shutter Speeds

Amateurs and pros alike face the fact that slower shutter speeds and camera shake lead to blurred images. This tutorial by David Bergman demonstrates some of the main reasons for camera shake and how to overcome them:

Camera Shake Rule of Thumb

The old school rule of thumb about camera shake is that as long as the denominator of the shutter speed is bigger than the focal length, you can avoid image blur. That means that if you’re shooting at 50mm, you should select at least a shutter speed of 1/50 of a second or faster to get a blur-free image. In the real world, the wider the focal length, the less the camera shake.

rule of thumb for shooting handheld at slow shutter speed

Modern lenses come with built-in image stabilization and selectable ISO. These are great in terms of speeding up the shutter speed and getting blur-free images.

Use higher ISO to negate camera shake

Body Positions to Prevent Camera Shake

There are a host of techniques that you can adapt in order to minimize camera shake.

First, keep one hand underneath the lens barrel (as demonstrated below) in order to stabilize it.

proper camera holding position

Keep one hand under the lens.

Tuck your elbows in to your body to reduce movement.

how to shoot without camera shake

Spread your feet slightly so you’re properly balanced.

spread your legs to balance yourself

If possible, lean against a wall or a tree for additional support.

trips to shoot with camera shake

Take slow, deep breaths and press the shutter release at the end of your exhale.

Look through the viewfinder instead of at the LCD screen to compose shots. Holding your camera up against your faces gives you an extra bit of support.

use the viewfinder rather than the lcd screen

If you have to use the back LCD screen, use the camera neck strap and hold it as far and as hard as you can. It should give you some leverage to get sharp clean video footage.

shoot without camera blur using slow shutter speed

Make use of your neck strap.

Finally, if you’re still plagued by the problem of camera shake, set your camera to burst mode and fire away as many shots as you can. Chances are you will get at least a few frames that are perfectly sharp.

Do you have any tips to add?


Go to full article: How to Keep Your Camera Stable for Sharp Photos at Slow Shutter Speeds

What are your thoughts on this article? Join the discussion on Facebook

Article from: PictureCorrect

The post How to Keep Your Camera Stable for Sharp Photos at Slow Shutter Speeds appeared first on PictureCorrect.



from PictureCorrect http://ift.tt/2lhWtNA
via IFTTT

0 kommenttia:

Lähetä kommentti