Shafts of light streaming down from the sky our through a window makes for wonderfully dramatic lighting in photography. These shafts of light, especially when you create an atmosphere using smoke or fog, can really make your images pop. The setup may appear complicated when you first try it out, but it’s not so bad once you get the hang of things. Jay P. Morgan demonstrates:
Bring in fog or smoke
Smoke or fog creates an atmosphere conducive to using shafts of light. Light needs to bounce off of something in the air to reveal itself and produce that distinct shaft.
You need atmosphere for your images
Morgan recommends using something like the Rosco Vapour Fog Machine to produce the fog.
Adjust the angle of the light source
Bring your light in and aim it back toward your camera to create a realistic light shaft. Light shafts shouldn’t be aimed out and crossing the scene as much as back into the scene and aimed at the camera at an angle of about 45 degrees.
The angle of the light is critical
Quality of light
Quality of light is more about how your lights are focused than anything else. To demonstrate, Morgan uses two similar lights—one in full focus and the other in full flood. The light on his right is in full flood, which makes it soft and spill everywhere. The light on his left is in full focus, which is why the light is more intense and creates a nice shaft.
Quality of light is essential
Continuous lights are a better choice than strobes for producing great shafts of light.
But you’ll probably want to mix both continuous lights and strobes to get the perfect look. Use strobes to light your subject and continuous lights to create the light shaft.
Shape the light
Shaping the light is the final aspect of this setup. Most photographers prefer to use a window, especially if they’re using natural light as a key light. A window cuts the light and shapes it.
Add atmosphere using a smoke machine, and that’s it!
Go to full article: How to Capture Shafts of Light in Your Photos
What are your thoughts on this article? Join the discussion on Facebook
Article from: PictureCorrect
The post How to Capture Shafts of Light in Your Photos appeared first on PictureCorrect.
from PictureCorrect http://ift.tt/2jbjEGI
via IFTTT
0 kommenttia:
Lähetä kommentti